UNIK NXi 30

NXi 30

Production Scale Single Side Table Press -Exchangeable Turret

The revolutionary new NXi 30 tablet press has an optional EXCHANGEABLE COMPRESSION MODULE (ECM), which allows full change-over in less time and the ability to utilize D, B and BB tooling on a single machine. All product contact parts are included in this ISOLATED DUST TIGHT module, which is disconnected and removed in minutes. Another clean isolated module with the right tooling can now be installed and the machine is ready to produce the next batch.

Ideally suited for:

  • Pharmaceutical, Veterinary, and Nutraceuticals
  • High volume products

Features:

  • Single Rotary Tablet Press Machine.
  • Pre-compression with the force of 40 KN
  • Centre driven machine
  • ELNP Turret and Upper Cam Tracks
  • Turret with lower punch seal
  • Safety Interlocking for Upper & Lower Guard.
  • Force feeder with variable speed and bottom drive and synchronized with main motor.
  • Efficient Lubrication system for Upper and Lower punches
  • Contact Parts SS 316 (Except turret & Cam tracks)
  • Upper Punch Penetration: to change the compression zone to suit the product requirement or use die to its fullest length.
  • Control operation through PLC / MMI

AFR / AWC - System

  • Display of individual punch  force  ( Main compression & Pre Compression )
  • Main & Pre Compression Graph representation
  • The faulty tablet will be rejected automatically
  • Three Way Discharge chute for Start Stop & Sampling Rejection, Ok Tablet, Rejected Tablet
  • Control the weight base on Compaction force. If compaction set force for most of the punch goes above or below the limit dozer will adjust automatically to achieve the set limit.

Operation through IPC Panel:

  • 15 “ Color Touch Screen
  • Visual indication of all alarm
  • 3 level Password
  • Record & Printout Facility of all data.
  • Ethernet port available
  • SCADA System
  • Real time Graph ( Main & Pre Compression )
  • Audit trail
  • Motorize Control For Main & Pre Compression, Weight Dozer

 

Model

UNIK NXI

UNIK NXI

UNIK NXI

No. of stations

30

37

45

Tooling

D

B

BB

Tablet diameter (Max.) in mm

25

16

13

Depth o fill (Max.)

20

17

15

Tablets/hr (Max)*

180000

222000

270000

Turret RPM (max)

25/100

25/100

25/100

Max. compression Force

10 ton

10 ton

10 ton

Max. Pre compression Force

4 ton

4 ton

4 ton

Upper punch penetration

2.5/8.0 mm

2.5/8.0 mm

2.5/8.0 mm

Pitch circle diameter

410 mm

410 mm

410 mm

Electrical Motor

10 HP , 480 V AC, 3 Phase , 60 HZ

Force feeder motor

0.5 H.P. 220 V A.C., 75 RPM, 50 HZ, 1 PH

Machine size in mm

1220 x 1143 x 2190

Net weight in kg.

4500

Request further information