OSCILLATING GRANULATOR
Dry / Wet Granulation, Screening, Crushing, and Breaking
The Pilot Scale Oscillating Granulator plays an important part in the process of granulation in tablet making as quality of tablet is determined by the virtue of the granules used for its compression. Oscillating granulator can be used for wet and dry aspect of the granulation process Quality of granules are better compared to other processing machineries like multi mill, comminuting mill etc.
All contact parts are in stainless steel Mounted on a base Adjustment, cleaning and operation are simple. Sturdy, durable, better productivity unique oscillatory rotor action ensures high outputs and a predictable product with minimum of fines.
Features
- Robust and durable, quiet in operation, large output.
- A traditional size reduction technology.
- All contact parts are SS 316L & non-contact parts are SS 304.
- Continuous oscillating stirrer drive.
- Suitable for production of granules from dry and wet materials.
- Gentle grinding action of horizontal rotor against wire mesh gives uniform particle size.
- Wire mesh or perforated mesh can be used.
- Availability of different mesh sizes of screen.
- Does not generate heat or dust, ideal for sticky heat sensitive products.
- Hopper and rotor can be easily removed for cleaning.
- Safety mesh on top of hopper and side guards are provided.
- Output varies from 30 to 200 kg per hour depending on product and screen.
Specifications
Type |
Unit mounted on Castor Wheel mounted fixed legs |
Capacity |
30 to 100 Kg/hr (can vary as per material property) |
Input Charged |
Manual OR through port |
Output Discharged |
By Gravity |
Model |
GMP Model with contact parts SS316 |
Code |
Good Engineering Practice |
Net Weight |
240 Kgs. |
Overall Dimensions |
As per layout drawing, to be provided. |
Cone & top cover |
Made from AISI SS316 |
Rotor |
Complete made from AISI SS316 |
General Structure |
Made from mild steel & cladded or covered with SS304. |
Perforated Sieve |
SS316 |
Gasket |
Silicon Rubber |
Type |
Single Speed / NON FLP |
Size & RPM |
1 H.P. & 1400 RPM |
Protection |
IP 55 |
Mounting |
Foot Mounted. |
Gear Box |
Warm Reduction Gear for speed reduction |
Processing parts |
Hopper(size)-15” X 18” x 14” Stirrer Size-Dia.142mm/Length 345 mm Oscillation - 48 per minutes |
Output |
For wet Mass – 30 to 200 Kgs. If use 4,6 or 8 Mesh sieves. For wet Mass – 20 to 100 Kgs. If use 16,18 OR 20 mesh sieve. Dry Mass - @ 50 to 60 Kgs. |
Starter |
Starter for ON /OFF the motor. |
Earthing |
A proper earthing point is provided to the body of the M/C |
SAFETY FEATURE |
All moving parts are covered. |
Contact parts |
@ Mirror Finish |
Non Contact Parts |
@ Matt Finish (General Structure) |
Electrical |
3 Phase 220V 60 Hz |
Total Load |
1 HP |
CLEANING OF PARTS |
All the contact parts must be clean at their place only. |
Scope of Standard Documentation |
-Validation Documents -Material Test certificate for contact parts -Installation & Maintenance Manual -Spare Part List -Certificates, Manual for Bought out items -Electrical Circuit Diagram -Schematic Diagram of machine showing all Dimension. |